Expert Interlock Paver Guidance Free Matching Service Metro Vancouver Interlock Specialists
Find an Interlock Contractor
Paver Driveways | 2 views |

How much does it cost to replace a concrete driveway with pavers in Burnaby?

Question

How much does it cost to replace a concrete driveway with pavers in Burnaby?

Answer from Interlock IQ

Replacing a concrete driveway with pavers in Burnaby typically costs $12,000-$28,000 for a standard 500-800 sq ft driveway. This includes removing the existing concrete, proper excavation and base preparation, 80mm concrete pavers rated for vehicular traffic, and professional installation with polymeric sand and edge restraints.

The total cost breaks down into several components that are essential for a long-lasting installation in Metro Vancouver's wet climate. Concrete removal and disposal adds $3,000-$6,000 to your project — existing concrete must be saw-cut into manageable sections, jackhammered out, loaded onto trucks, and disposed of at approved facilities. This is heavy, labour-intensive work that requires professional equipment and disposal permits.

Base preparation is critical in Burnaby's clay-heavy soils. Your new paver driveway needs 10-12 inches of compacted granular base to handle vehicle loads and drain properly in Metro Vancouver's 1,200mm+ annual rainfall. The clay subgrade common in Burnaby doesn't drain well and can destabilize your driveway if not properly addressed. Professional installation includes geotextile fabric between the clay and gravel base to prevent soil migration, proper compaction in 2-inch lifts, and adequate drainage slope away from your home and garage.

Material costs for driveway pavers run $8-$15 per sq ft for quality 80mm concrete pavers in standard colours and patterns. Premium textured pavers, large-format slabs, or specialty colours can push material costs to $12-$20 per sq ft. Popular choices for Burnaby driveways include Holland pavers in charcoal or grey tones that complement the region's natural landscape and hide tire marks better than lighter colours.

Labour for paver driveway installation runs $8-$15 per sq ft in Burnaby, reflecting Metro Vancouver's higher construction costs and WorkSafeBC requirements. Complex layouts, curved edges, or difficult site access can increase labour costs significantly. Properties without direct truck access to the driveway area — common in older Burnaby neighbourhoods — require manual material transport that can add $2,000-$4,000 to the project.

Drainage considerations are especially important for driveway replacements in Burnaby. Your new paver driveway must maintain proper drainage away from your home's foundation while connecting to the municipal storm system if required. Burnaby's engineering department may require a drainage permit for significant changes to impervious surface area or runoff patterns. Permeable pavers are an excellent option for Burnaby driveways — they cost $15-$25 per sq ft installed but help manage stormwater runoff and may qualify for municipal incentives.

Timeline for a typical driveway replacement is 3-5 days in dry weather — one day for concrete removal, 1-2 days for excavation and base preparation, and 1-2 days for paver installation and finishing. Work during Burnaby's rainy season (October through March) takes longer and costs more because contractors must protect the work area and time concrete removal and base work between weather windows.

Maintenance costs should factor into your decision. Paver driveways require polymeric sand replenishment every 3-5 years ($300-$600), occasional power washing to remove moss and algae buildup, and potential sealing every 5-8 years ($1,500-$3,000) to maintain appearance and protect against staining.

This is definitely a professional installation project. Driveway pavers must withstand 4,000+ pound vehicle loads repeatedly without settling or shifting. Inadequate base preparation — the most common DIY mistake — causes expensive failures within 1-3 years that require complete reinstallation.

Need help finding an interlock contractor for your Burnaby driveway replacement? Vancouver Interlock can match you with experienced local professionals who understand Metro Vancouver's climate challenges and municipal requirements.

---

Find a Interlock & Paver Contractor

Vancouver Interlock connects you with experienced contractors through the https://vancouverconstructionnetwork.com:

View all paving contractors →
Vancouver Interlock

Interlock IQ -- Built with local interlock installation expertise, Metro Vancouver knowledge, and real construction experience. Answers are for informational purposes only.

Ready to Start Your Interlock Project?

Find experienced interlock contractors in Metro Vancouver. Free matching, no obligation.

Get a Free Interlock Quote